/*******************************************************************************
* PMC825 UDP/IP Socket Interface Test Program                                  *
*                                                                              *
* (C) 2010 Stock Flight Systems. All rights reserved.                          *
*                                                                              *
* Filename: arinc825read.c                                                     *
*                                                                              *
* Redistribution and use in source and binary forms, with or without           *
* modification, are permitted provided that the following conditions are met:  *
* Redistributions of source code must retain the above copyright notice, this  *
* list of conditions and the following disclaimer.                             *
*                                                                              *
* Redistributions in binary form must reproduce the above copyright notice,    *
* this list of conditions and the following disclaimer in the documentation    *
* and/or other materials provided with the distribution.                       *
*                                                                              *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER "AS IS" AND ANY EXPRESS    *
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES *
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN   *
* NO EVENT SHALL THE COPYRIGHT OWNER BE LIABLE FOR ANY DIRECT, INDIRECT,       *
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT *
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  *
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         *
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, *
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           *
*                                                                              *
* This file contains a test program which interfaces to the PMC825 via the     *
* UDP/IP socket interface.                                                     *
*                                                                              *
* Function names                                                               *
* ____________________________________________________________________________ *
*                                                                              *
* int main(void)                                                               *
* void ExceptionHandler(void)                                                  *
*                                                                              *
* MODIFICATIONS:                                                               *
*                                                                              *
* When          Version      What                                  Who         *
* ____________________________________________________________________________ *
*                                                                              *
* 22.04.2010    1.0          Initial Version                       M. Stock    *
*                                                                              *
*******************************************************************************/

/*
 * Includes.
 */

#include "pmc825socket.h"
#include "arinc825.h"

/*
 * Local definitions.
 */

#define	LPORT_BASE	34567           /* Local UDP/IP port number base */
#define	RPORT_BASE      34568           /* PMC825 UDP/IP port number base */

#define PRINT_ATM
#define PRINT_PTP

/*
 * Globals.
 */

PMC825_IF Pmc825;

/*
 * ExceptionHandler() frees all resources then terminates.
 */

void ExceptionHandler(void)
{
Pmc825StopInterface(&Pmc825);
printf("\nProgram terminated, all resources released.\n");
exit(0);
}

/*
 * main() starts here.
 */

int main (int argc, char *argv[])
{
#ifndef WIN32
struct timespec t2,t1 = {0,1000000*5};	/* 10ms frame time */
#endif
unsigned int ts, tsl, tsh;
unsigned int host_ip, pmc825_ip, lport, rport;
unsigned char *ucptr, tmp[4], hip[32], pip[32], ch[8];
int loops, ret, chan, ip[4];
float tsf;
ARINC825_MSG rx_buf, tx_buf;

/*
 * First of all, get IP addresses and CAN channel number.
 */

if (argc != 4)
  {
  printf("usage: %s host_ip pmc825_ip can_channel\n", argv[0]);
  exit(1);
  }

strcpy(hip, argv[1]);
strcpy(pip, argv[2]);
strcpy(ch, argv[3]);

sscanf(hip, "%d.%d.%d.%d", &ip[0], &ip[1], &ip[2], &ip[3]);
host_ip = (ip[0] << 24) | (ip[1] << 16) | (ip[2] << 8) | ip[3];

sscanf(pip, "%d.%d.%d.%d", &ip[0], &ip[1], &ip[2], &ip[3]);
pmc825_ip = (ip[0] << 24) | (ip[1] << 16) | (ip[2] << 8) | ip[3];

sscanf(ch, "%d", &chan);

lport = LPORT_BASE + chan * 2;
rport = RPORT_BASE + chan * 2;

/*
 * Set up the exception handler. We want to make sure that we perform
 * cleanup in case we are terminated by some unexpected event.
 */

#ifndef WIN32
signal(SIGQUIT, (void *) ExceptionHandler);
signal(SIGINT,  (void *) ExceptionHandler);
signal(SIGTERM, (void *) ExceptionHandler);
signal(SIGKILL, (void *) ExceptionHandler);
signal(SIGPIPE, (void *) ExceptionHandler);
#endif

/*
 * Initialize the interface for the PMC825 (CAN channel 0).
 */

ret = Pmc825StartInterface(&Pmc825, pmc825_ip, host_ip, rport, lport, chan);

if (ret == PMC825_MEM_ALLOC_ERR)
  {
  printf("Memory allocation error, exiting ...\n");
  Pmc825StopInterface(&Pmc825);
  exit(0);
  }
else if (ret == PMC825_SOCKET_ERR)
  {
  printf("Socket error, exiting ...\n");
  Pmc825StopInterface(&Pmc825);
  exit(0);
  }

/*
 * Set CAN baud rate.
 */

tx_ctrl.opcode = CAN_CTRL;
tx_ctrl.svc_rsp_code = INIT_CAN_CHIP;
tx_ctrl.arg[0] = CAN_1M;
tx_ctrl.arg[1] = 0;
tx_ctrl.arg[2] = 0;
tx_ctrl.arg[3] = 0;
tx_ctrl.arg[4] = 0;

ret = Pmc825CtrlWrite(&Pmc825, &tx_ctrl);

if (ret != PMC825_OK)
  {
  printf("INIT_CAN_CHIP failed, exiting ...\n");
  Pmc825StopInterface(&Pmc825);
  exit(0);
  }

/*
 * Now go into an endless loop reading from the PMC825.
 */

printf("Read data [CAN %d, Host IP %s]\n", chan, hip);

for (;;)
  {
  /*
   * Get all received ARINC825 messages and print them.
   */

  ret = Pmc825Arinc825Read(&Pmc825, &rx_buf);

  while (ret != PMC825_NO_MSG)
    {
    /*
     * Artificially reduce the time stamp resolution from 31,25ns to 1us
     * for display purposes.
     */

    tsl = rx_buf.time_stamp_lo;
    tsh = rx_buf.time_stamp_hi;
    tsl = (tsl >> 5) & 0x07ffffff;
    tsh = (tsh << 27) & 0xf8000000;
    ts = tsl | tsh;
    tsf = ((float) ts)/1e6;

    if (rx_buf.identifier.lcc == NOC)
      {
      printf("%1.4f  LCC=%d, SCFID=%03d, SMT=%d, LCL=%d, PVT=%d, RCI=%02d, DOC=%05d -> ",
             tsf, rx_buf.identifier.lcc, rx_buf.identifier.scfid,
	     rx_buf.identifier.smt, rx_buf.identifier.lcl,
	     rx_buf.identifier.pvt, rx_buf.identifier.rci,
	     rx_buf.identifier.doc);

      for (loops = 0; loops < rx_buf.byte_count; loops++)
        printf("0x%02X ", rx_buf.data[loops] & 0xff);

      printf("\n");
      }
    ret = Pmc825Arinc825Read(&Pmc825, &rx_buf);
    }

  /*
   * 10ms time frame.
   */

#ifndef WIN32
  nanosleep(&t1,&t2);
#else
  Sleep (10);
#endif
  }
exit(0);
}

/*
 * End of file.
 */
